BLOCK PAVING SEALER
RESIBLOCK Sealants
 |
 |
 |
| Perfect Paths | Pretty Patios | Beautiful Driveways |
Residential and Commercial
If you have just installed a new Driveway, Patio or Paths or you simply wish to revive your existing paving then you should consider using a sealant to stabilise and protect your investment. Resiblock Sealants provide an accelerated joint stabilisation without sand erosion and with minimum ongoing maintenance.
Resiblock limited was established in1993 and today they are Europe’s leading specialist providing sealing solutions worldwide. They offer an extensive range of sealants to seal, stabilise and protect Natural Stone, Indian Sandstone Paving, Yorkshire Paving Flagstones, Clay Block Paving and Concrete Block Paving for industry and homes.
Cheshire Bin Cleaners are Registered Installers of Resiblock Ltd.
Our Process:
We will pressure wash your Driveway or Patio and remove all weeds, moss and any grass from between your paving. After cleaning we will re-sand your paved area with Special Kiln-Dried Sand before applying your chosen Resiblock Sealant. The Process is generally carried out over two days. Please call for a quote.
Below are two of the most popular products we use to protect our clients
RESIBLOCK SUPERIOR and RESIBLOCK SUPERIOR NATURAL MATT Both products are urethane based low viscosity prepolymer in Hydrocarbon solvents. Its function is to bond the jointing sand and seal the surface of concrete block paving. Its penetration comes about by solvent evaporation, and polymerisation is created by the atmospheric and residual moisture effecting the cure. The resulting effect is an in-situ bond and stabilisation of the pavement that retains its normal flexural properties. RESIBLOCK Superior is manufactured under the jurisdiction of BS 5750. This is suitable for concrete Block paving.
The Benefits are:
- Wet-look finish or Matt look finish
- Lasts up to 5 years
- No more Weeds
- Will not chip or peel
- Stop blocks becoming stained by engine/fuel oil
- Eliminate weed and grass growth in the sand joints
- Prevent blocks becoming soiled by drink/foodstuffs
- Reduce the nuisances associated with ants’ nests
- Stop loss of sand by wind, rain or pressure washers
- Eliminate algae and lichen growth
- Resists blocks from fading and will eventually darken (rather than fade),
however lighter coloured blocks (inc. Grey) may become dark
yellow/brown (particularly if over applied) - Extremely weather resistant
- Hard wearing, durable and long lasting, with a proven track record
- Unaffected by water or ice
- Enhance lost colour in old blocks
- Provide a water resistant bond
- Consolidates block joint infill
- Provide a cleanable surface (often without the need for detergents)
- Highly resistant to a wide range of aggressive industrial chemicals
- Suitable for interior work
- Treats pavers and joints at the same time
- One component ready thinned and ready for use
- Greatly improves resistance to tyre marking
